You'll know if you've tripped the safety instead of dropping the firing pin when the safety blade is firmly locked up. Simply lift the bolt handle and return to closed and it will reset. No need to cycle the bolt.

If it becomes unmanageable, remove the barreled action from the stock and using the yellow tool provided in the sealed bag included with the rifle, turn the rear trigger screw in a quarter turn and recheck the trigger both out of the stock and then in. Repeat until you have reliable trigger set. There are also shim kits available to shim the sides of the trigger. This allows you to get a light break while still being reliable. https://triggershims.com/