Typically, to remove a rimfire bolt you pull it all the way back (after making sure the firearm is unloaded), release the safety, open the bolt fully, pull the trigger and then pull the bolt rearward.
The sear is the only bolt stop.
Typically, to remove a rimfire bolt you pull it all the way back (after making sure the firearm is unloaded), release the safety, open the bolt fully, pull the trigger and then pull the bolt rearward.
The sear is the only bolt stop.
"They couldn't hit an elephant at this distance." Last words of Gen. Sedgwik
Posting Permissions
Reply With Quote
Bookmarks