Not a problem at all. I was just looking at it from the cost side.

For a project, if you are good with tools, then I'd get a Boyd's stock you like and then modify it to fit whatever magazines you wanted to use. It would take some new bottom metal and fabrication of a magazine retention system.

Full bedding is better than just pillars, but, for the Axis, not by a lot. If you are capable of shooting 1/4MOA on a regular basis then you might be able to tell the difference. If you are like me, at the 1/2MOA level, then probably not. I noticed the difference when I went from a stock Axis to the Boyd's Pro Varmint stock (without bedding). But, I did not notice any difference when I bedded the Pro Varmint stock. I was at 1/2MOA before and still 1/2MOA.

Why might this be? First, my shooting skill is not that great. Second, the Axis action does not have a lot of area that can be used for bedding.