I like the Warne 7666M or 7666-20MOA one piece bases.
Finally found a decent price on a decent optic for my 110 Tactical, but now I can't find the top rail. Assuming I won't find it, what is a good replacement mount that is reasonably priced? Thanks
I like the Warne 7666M or 7666-20MOA one piece bases.
Give Dednutz a look, I have one of their one piece ring/bases on a Savage long action, been rock solid on a 30-06
Thanks, I'll check these out.
From the research I've been doing, it looks like Evolution Gun Works (EGW) supplies the rails for these rifles, but they have two different models based on what aluminum alloy is used. Any idea which one ships with the rifle?
I'm 99.9% sure the 110 Tacticals use 8-40 mount screws rather than the usual 6-48, so make sure the mount you get is setup for the larger size. EGW (who makes the included rail on these) can get you a replacement that has the right screw hole size.
"Life' is tough. It's even tougher if you're stupid." ~ John Wayne
“Under certain circumstances, urgent circumstances, desperate circumstances, profanity provides a relief denied even to prayer.” —Mark Twain
I've always had good service using EGW mounts.
Vietnam Vet, Jun 66 - Dec 67
Just make certain whatever rail you choose is 7075-T6 Aluminum. The brand isn’t so important. EGW is very good, as are Warne, TPS & Leupold mounts.....and about half a dozen or so others! Can’t go wrong with any of these 1-piece 7075 mounts. Given the fit is correct and screws are tight size like Jim pointed out.
I turned my shop upside down looking for the mount. Never found it. (Found a ton of other stuff I had forgotten about). I finally called Savage to verify if it should have come with a mount and see if I could order one from them. They told me it should have come with a mount and sent me a replacement. Plus 1000 for customer service! Thanks for the suggestions.
Bookmarks