Quote Originally Posted by deertroy1 View Post
The hole should be good as it's a PTG bolt head, but you never know!
I wish I could load the pictures of my primers before I went to the CCI 41's.

They looked like a over pressure load. I use the same load now with the heavy primers and they all look normal and have not cratered or pierce a primer since.

Not saying you have this issue, but I was posting on accurateshooter.com forum and someone put a link up to a gunsmith that will correct this issue with the bolt head that i have on my Savage 12 F/V.

Figured I would try the heavy primers and it worked for me.

Good luck

Larry