Will this be compatible with the Savage 11 DOA Hunter XP 308 and/or Savage 10T Tactical 308?
Will this be compatible with the Savage 11 DOA Hunter XP 308 and/or Savage 10T Tactical 308?
It's going to be a godsend.
At 3.3 pounds it's going to be heavy for a hunting rifle.
It should fit. It does not mention the top or bottom release issue. It does show a top release in the photo.
Might be worth the time to send an email.
The Dunning-Kruger effect is alive and well.
Finally!
FTR in 223, BA LE Tactical in 308, 110 Flatback in CBI 6mmBR Norma, Others
As I mentioned in my article, it doesn't appear the new Magpul stock will be compatible with bottom bolt release models. All their photo's and the video show TBR models, and I see no way for their mag well hardware to incorporate a bottom release lever or button. It's possible they did a pin hole like some of the chassis manufacturers did where you can use a paperclip to move the sear out of the way, but until one actually gets their hands on one or I hear something back from Magpul stating otherwise I'm assuming they did not.
http://www.savageshooters.com/conten...ctions-in-2020
"Life' is tough. It's even tougher if you're stupid." ~ John Wayne
“Under certain circumstances, urgent circumstances, desperate circumstances, profanity provides a relief denied even to prayer.” —Mark Twain
Looks pretty nice.
Now if they would just make a 223 aics style mag to fit it.
They are releasing a 5.56 AICS mag too, is this what you are looking for?
Bookmarks