Quote Originally Posted by rdb8847 View Post
Hello

I apologize up front for my ignorance

Wondering if the tight chamber - sticking brass issue was ever solved. I have one in the safe that I have not shot for 3 years or more because I got tired of having to use a rod to remove brass. I remember there was alot of discussion about the tight chamber - sticky brass - issue.

Any help would be greatly appreciated.......
Guessing you checked primary extraction at the time, but wouldn't hurt to double check.
Another question, does factory ammo act the same?
Is it an aftermarket barrel?
Small shank or large shank?
One problem that some may argue with is that using larger diameter, higher pressure cartridges in a small shank will cause more "chamber stretch". With looser fitting threads the "stretch" is more. Regardless if the action itself is the same outside diameter.
Just some thoughts.