Next up, thanks to mussy on thingiverse for an awesome design.
Sent from my iPhone using Tapatalk
First print The monopod.
For the donor I'm going with an accutrigger 110 270 I picked up a few years back for $185 at a pawn shop.
Sent from my iPhone using Tapatalk
Next up, thanks to mussy on thingiverse for an awesome design.
Sent from my iPhone using Tapatalk
5 days into a six day print
Sent from my iPhone using Tapatalk
Awesome! Been looking to get into this as a hobby. Where are you finding the files for these?
FTR in 223, BA LE Tactical in 308, 110 Flatback in CBI 6mmBR Norma, Others
This one came from thingiverse, grabcad is another. Most of the stuff I do I design in fusion360 modeling software
Windows 10 even has decent modeling software built in. An Ender3 printer can be had for $200. Simplify3d printing software is $125 add plastic and your good to go.
Sent from my iPhone using Tapatalk
Commenting on this thread for a couple of reasons... I got in on the Black Friday MDT chassis deal too, for my model 10. Through an order screwup, though, I'm still waiting for it. An LSS showed up last week instead of the LSS-XL I wanted.
Second thing, on printing... I was looking at possibly getting one of these 2-round M-LOK quivers... but man, are they pricey! I started thinking about getting a 3D printer just to try printing one. What do you think?
Model 10 FCP-SR | Vortex Viper PST | Schuler Brake
That’s cool I’ve never seen one should be an easy design if a file isn’t already available.
Sent from my iPhone using Tapatalk
An ender3 is what I use, I’ve been playing around in 3D builder in windows 10 this morning here’s what I built for 7wsm
Sent from my iPhone using Tapatalk
Well when it all settled out the MDT long action chassis ended up being a 300 win mag and the 6.5 creedmore is in a lefty axis MDT chassis I found on eBay. I redesigned the stock and it’s reprinting out of some really tough stuff I usually make gears from. Moral of the story is given the time, effort and cost of material I should have just bought a luthAR stock and called it good. But then I wouldn’t have learned about 2 shot quivers and designed one for damn near every caliber I own. Below is a pic of the mdt axis chassis, I really like the pistol grip.
Sent from my iPhone using Tapatalk
Actually have some printing today, have to see how they turn out. Here is the first part of the modified stock. It needs a little sanding and some flat black epoxy but it looks good so far. I added the Savage 300 Win mag stenciling to the side and reworked the internals in the back to take a 3/8 carriage bolt I’m going to use for a monopod. The plastic I’m using is RYNO from matter hackers. It’s expensive but stronger than crap and prints very well. if you look closely at the mag you can see where I had to modify it to accommodate the back shelf on the stagger feed receiver.
Sent from my iPhone using Tapatalk
I like the custom elements in the stock: Savage, 300 Win Mag. It looks like it printed really well. Monopods are another otherwise expensive thing that seem to lend themselves to printing.
Model 10 FCP-SR | Vortex Viper PST | Schuler Brake
Well... I just got a large hint that there’s an Ender 3 under the tree for me. So maybe I’ll be hitting you up for some files...
Model 10 FCP-SR | Vortex Viper PST | Schuler Brake
No problem
Sent from my iPhone using Tapatalk
Got a chance to sight her in at 100yds, I’m very happy with the accuracy this is factory Winchester 150 gr. At 100 yds off a bipod with a trigger pull right at 6.5 lbs. after I get the old 3 screw down to 3ish lbs I expect the groups to get a lot tighter.
Sent from my iPhone using Tapatalk BBC BBC
The stock modified for a monopod, yes it’s currently a 3/8ths carriage bolt but in 10 minutes on the lathe I can make it pretty.
Sent from my iPhone using Tapatalk
3 shot rail mount quiver. My son picked the skull design. If I only had some gold filament this this thing could be blinged right up.
Sent from my iPhone using Tapatalk
I haven't received an email from you yet, but I did find this. Exactly what I was looking for, and I could only find it by searching for "308."
Model 10 FCP-SR | Vortex Viper PST | Schuler Brake
Wow good find, it looks like the one the guy is selling. I was in the deer stand when I got your text and forgot. I’ll send it when I get home. I designed a sled that should snap in place of an axis long action mag last night. This was the first time I imported a picture to create a 3d object. I’m a little blown away by the amount of horse power included in windows 10.
Sent from my iPhone using Tapatalk
Decided to try my hand at epoxy cast resin for the sled. I need to work on my mold making technique a little but this stuff is rock solid. I’m considering using the mag to make the mold and skipping the design and 3D printing part. This stuff is a little on the pricey side though.
Sent from my iPhone using Tapatalk
Bookmarks