Quote Originally Posted by DeltaNu1142 View Post
Glass half full, I like it.

If you feel like printing one in .308 for me, I'll happily fork over something for it. It may be the nudge I need to get into printing.
Actually have some printing today, have to see how they turn out. Here is the first part of the modified stock. It needs a little sanding and some flat black epoxy but it looks good so far. I added the Savage 300 Win mag stenciling to the side and reworked the internals in the back to take a 3/8 carriage bolt I’m going to use for a monopod. The plastic I’m using is RYNO from matter hackers. It’s expensive but stronger than crap and prints very well. if you look closely at the mag you can see where I had to modify it to accommodate the back shelf on the stagger feed receiver.


Sent from my iPhone using Tapatalk