You fake it just like I do. If you’re not right, then at least you have company.
I could only fit 3-4 rounds in my new to me 308...so I took a few minutes to reduce the rotor tension. The numbers were also not centering in the counter window.
After adjustment, the # 0 and #2 still seems a bit too high in the counter window but it feeds and functions now. The rest of the numbers are well centered. I am about to call it good enough for Government work.
Video of the job here. Feedback from any-one who actually know what they are doing ( I am faking this gun-smith thing) is welcome.
https://www.youtube.com/watch?v=oXerR6eDwOA
You fake it just like I do. If you’re not right, then at least you have company.
Never saw the need for the “count window”.
Can’t think of any other 5-rnd. magazine rifle that has one, and I don’t miss it.
(my two M99’s have “miss-alighned” numbers in the window . . . .SO WHAT!!)
The counter (especially when brass) adds to the 19th century cool factor of the 99.
So true. And it polishes up so nicely. The warning I hear more often is not to disassemble the rotor, but that’s straightforward enough, too. You just need to have something to grip the end, like a drill chuck, and know that it’s a left handed thread. The two I’ve disassembled have benefited from a thorough cleaning and lube.
My '21 99G breakdown suffers from badly registered numbers, and dull too, I guess I'll have to look into taking it apart and clean it up. Shoots OK though. Not sure it's ever been apart that I know of.
Hey North 61 . . . Seen a lot of your YouTube’s on the Model 71, thanks! Do you know of Hawk bullets?
Bookmarks