I didn't make the URSA shoot but yesterday I got some replacement parts from Glades that had been lost in the mail.

After some testing and swapping, I now have a fluted bolt sleeve and bolt handle that fit my action. I would even go so far as to say the bolt lift is pretty nice.

I have also skim bedded the recoil lug and receiver front in my chassis and am almost set to angle bed my scope rail. That will give me 23 mils of drop to dial in which should be close to 2,000 yards and I can hold over with the reticle about 13 mils which should be close to 2,500 yards (in theory).

I called up Savage to get parts to make my spare parts in to a complete spare bolt. They have a silly policy of only selling firing pins, firing pin springs, cocking pieces and bolt assembly screws to FFLs so I'm going to have to bug a friend to make a call for me.

I will try to get this together soon but I'm not sure if I'll be able to get it broken in before next year.