this is the new pro mag aas10 archangel carbon glass infused polymer stock on my savage trophy huntre 308 model 10.
the stock is for second AND third generations . its the same stock with the elliptical washer flipped either way you can accommodate both size action screw spacing.
AND YOU CAN have either bottom bolt or top bolt release . pic one shows little lever release just over trigger guard . there is a space in top of action inlet foe top bolt lever release .
the mag goes in and drops free easily . 2.815 max oal . the cheek riser adjusts to over an inch and the butt stock to over an inch . get specks on pro mag site . it is stiff polymer .
a barley visible seam on underside of stock its not cheep feeling . adjustments are stiff but very workable no wobble detected fit was tight took couple slaps to seat it down. once seated the pillars allowed a German type torque application. GOODENTIGHT . the fore end will allow bull barrels to sporter type. for me this seems like a home run . adjustable lop and cheek rise
detatchabe 7 round mag with an optional 5 round limiter for mag . and available 10 round mag for under 40 bucks. fits all sizes gen II AND III . looks sharp with 3 6 and 9 oclock attachment points for m loc and qd attachments no qd cups. only thing is you have to lower cheek riser to remove bolt . mag loads and has run and ejected well from bench . will give range report when weather lets up in north east. the rest of rig is a whitt machine clamp on muzzle brake . minox za 5i 5 x 25 x 56
Bookmarks