What mag? AICS style?
Not sure if this will help or not, but I had a similar issue with a short action. I had to mod the mags just a little.
https://www.savageshooters.com/showt...o-fit-a-savage
Has anybody else tried to drop in a PTG bottom metal into a long action Accustock? The profile of the inlet is fine, but when I torque the action screws down, something is impeding the magazine from seating, and I’m not sure what. I think it’s in the front of the mag well, but it’s hard to tell. Will come back with pictures later.
What mag? AICS style?
Not sure if this will help or not, but I had a similar issue with a short action. I had to mod the mags just a little.
https://www.savageshooters.com/showt...o-fit-a-savage
That might help. I’m hoping I can do some work on the stock to get it all to work, but I’m willing to sacrifice a mag to test.
I had the same problem and came to the same solution as JeepsAndGuns. I could have shimmed the bottom metal down but, I'm not a fan of adding more parts to the system.
Bookmarks