Same idea..but using Titanium & Tungsten Carbide. (Pics)

[jkv45]

^ Then You can do what I did ^ I ordered a replacement firing pin & spring from Midway, in case My plans didn’t work out. I cut 2 1/2 coils off the original firing pin spring. This, plus smoothing, polishing, and the 38spl lift addition, made a world of improvement.

Anyone who wants to prove to themselves where the heavy Savage bolt lift comes from, can do so by simply removing the firing pin and spring, reassemble the bolt, and cycle it. It is obvious the spring is the major culprit.

The rifle functions better than ever, and no negatives have been detected.

Thanks - I may have to do that.