Yes, you are correct Ted. THIS is Jim’s forum in fact.

As for removal, a good “rapp” on the barrel nut wrench has never let me down. One trick is actually a nice clean tap on the wrench in the clockwise direction(yes.., the tightening direction) FIRST! Then loosen the nut. Doing this is an old trick to ANY stuck nut or bolt where corrosion can be an influence.

Personally, I prefer having an Action wrench, Barrel nut wrench and Barrel vise. This way I have an answer for all walks. The RIGHT way is the one in which the barrel nut loosens. Doesn’t matter how you got there!