Quote Originally Posted by Dave Hoback View Post
Far as the SMOOTH barrel nut, here are both Small & Large shank nuts. Like I had said before, I have never seen these these machined from bar stock. So the factory stock unit is your only choice. Now, if you have the means, you can machine the stock part yourself which will be “better”. And use a MACHINED recoil lug as that is more important imo. Looks like you are out of luck for the cocking piece sleeve. Seems that EVERYONE is out of stock! Savage parts is your only recourse there. Call, start a convo. with the rep and give ‘em a sob story. Maybe they’ll bite!
https://www.midwayusa.com/product/1778511674/savage-arms-standard-shank-smooth-barrel-lock-nut-10-110-series-steel

https://www.midwayusa.com/product/17...-10-110-series
I checked in with Midway and it's a bust. The smooth barrel nut that's chewed up, I received from eBay, I've contemplated turning it and cleaning it up except I'm worried that it might be compromised and unsafe if I take any metal off of it.

I'm going to call the factory next week, for the cocking piece sleeve.