Quote Originally Posted by jim_k View Post
Thanks for the update! I've been telling people to use the Tubb Final Finish system. It has made a difference when I've used it, too. I also recommend the Hornady ELD line of bullets. I have not worked up a load that did not reach 1/2 MOA or less at mag length. Hopefully, that will avoid having to chase the lands.
Thanks. I think it was you that recommended Tubbs. It works wonders for a factory barrel. Also according to Zeidker the throat maintenance bullets polishes the throat and can extend barrel life 20-25%. It only takes a couple rounds every 100 rounds. I have the Hornady ELDs but haven’t tested yet. Berger told me you likely would not see a more accurate bullet than the 130 AR in their lineup. I tested at mag length and others but reserved a 0.00 jam for last resort. Bingo. they are not actually jammed into the lands so no problem to eject a loaded round. I will get to the ELDs though.