Does it look like this?
If so, it cant function without the adjustment screw. If you don't want to buy one, you have to make one. To make one you have to buy a a set screw to fit the threads and of the correct length. Anneal it so your HSS drill bit can drill out the center, drill out the center while clamped in a vice with soft jaws then using a Dremmel, cut 2 screw driver slots in the top side so it looks like a plus sign(+). This is for the wire spring to go in so the screw does not back out. this will allow quarter turn adjustments to the screw.
If you don't want to buy one and you don't want to make one, you could always just put the gun in the safe.
Bookmarks