sorry, have not been able to find anything for you.
If anyone could help, this would be completely appreciated. I have the shotgun halfway tore down, and am stuck at how to remove the trigger assembly. I tried removing the pin, but it doesn't seem to want to come out... Tried searching the net and these forums for help, but no go...
sorry, have not been able to find anything for you.
.223 Rem AI, .22-250 AI, .220 Swift AI .243 Win AI, .6mm Rem AI, .257 Rob AI, .25-06 AI, 6.5x300wsm .30-06 AI, .270 STW, 7mm STW, 28 nosler, .416 Taylor
I have a westpointmodel 167TD modelE 20 ga. Will not eject shells Ejector screw is missing. I need a schematic and instructions on how to remove the barrel
You have to take off the butt stock first, the draw bolt is attached to the trigger guard. After removing the stock it relieves the pressure on the pin you are trying to take out.
Not sure if this will help any, but it's the closest I could find.
https://www.gunpartscorp.com/gun-man...eries/67-ser-e
"Life' is tough. It's even tougher if you're stupid." ~ John Wayne
“Under certain circumstances, urgent circumstances, desperate circumstances, profanity provides a relief denied even to prayer.” —Mark Twain
Bookmarks