Quote Originally Posted by 35Whelenshooter View Post
Yes, as I run the brass in the die it crushes the neck and the case


Sent from my iPhone using Tapatalk
Another thing it could be, if using forster dies... alot of people make the mistake of adjusting the decap pin to not stick out as far and that will crush cases every time. If you are using forsters (best dies out there imo.. and le wilsons) look at the Instruction.. there is a weep hole on the die that has to be lined up with the expander ball and when properly adjusted, the decap pin sticks out alot further than most dies leading people to adjust it and crush cases doing so.

Sent from my SAMSUNG-SM-G935A using Tapatalk