![Quote](images/misc/quote_icon.png)
Originally Posted by
Wreck-n-Crew
Sorry. Missed the question about the stock screws. The rear screw takes the short screw. The long screw can be cut down to size as i did. I believe it needs to be 1.25". I guessed and scut it still a tad long. Then by looking in the chamber( bolt must be open for getting length) you can see how much needs to come off. I threaded a nut onto the screw prior to cutting. Then a slight chamfer to the end after cutting. Then run the nut off to insure threads are clean and good to go.
When the screw is slightly below where the bolt lug locks in, your good to go.
Mags are the MDT polymer 8 rounders ( hold 9 easy, 10 is a tad hard) and i ordered from Brownells with $10 off and free shipping. Hand feed and function are just fine but 308 bullet cant be more than 2.80" to fit mag.
Bookmarks