Mine is the Pro Varmint. The barrel channel was a bit 'tight' for me, heavy paper would slide between barrel and stock and I like a bit more clearance. so I wrapped some sandpaper around the barrel and worked it along the channel. The magazine catch is still not fitted right. It is a tab that is held in by the front action screw. Took a little work with a file to get the magazine to latch.

Quality was excellent, especially for such an inexpensive stock. Finish and action fit were very good. The recoil lug fit in the cut slot very closely. I have not bedded it at all but it is only a .223 If I had something with a bit more kick I would probably pillar bed it at least.