Might as well throw my own magazine into the mix. Took a cheap ebay Axis mag and merged it with a cheap 30rd Magpul. Ended up with something that holds 14 rounds or so. To me the hardest part was shaping the follower to make the action smooth enough. I used small nails through the mag slots into holes drilled into the Magpul. After fitting the Axis baseplate on I filled everything in with JB Weld. It honestly feels strong as hell.

I wish someone would make this as a commercial product. You end up spending $50 on all the parts to produce it and many hours of fitting...but it's worth it.


Attachment 5373Attachment 5374