Quote Originally Posted by jpdown View Post
Put tape across stock in front of recoil lug slot. After epoxy excess cures, score across top in front of lug under barrel nut. Lift tape and excess epoxy will break off cleanly at score. Fill groves with release agent
Next time I will do that. I tried to build a dam with putty, but I ended up putting too much epoxy into the recoil lug slot. This in turn caused an overflow, halted by the dam. So I essentially ended up bedding about half of the recoil lug. Thankfully, I was able to clean it up with my Dremel...grinding it flush with the cutout.



I've removed all the plumber's putty and brown shoe polish. The action fits like a glove. Tight and true. Form and function are much improved over the blind mag Tupperware stock. What a difference! Now I just need to figure out how to put the trigger back on (incl. a Rifle Basix SAV-1 upgrade). I'll post a pic when finished.