The fear has settled. Pillars came out just like they should. So on to the next step. I ruffed up the areas that beds to action and lug. Taped off the front and sides of the lug. Play-doe in the voids. Kiwi shoe polish on everything that might touch the Devcon 10110 bedding. Used a Velcro wire tie to hold action in place. Clean up with mineral spirits. Just a small amount of squeeze out, so I think i used the right amount, which can not be said of the amount I mixed up. Way to much, at least there is enough for the real thing. I was really surprised how little was in the jars, they were only filled up about 1/3 of the volume in the jars.

Here are progress pictures.

[IMG][/IMG]
[IMG][/IMG]

[IMG][/IMG]