The Accumag DBM is what I chose to use. The trigger guard sits proud about 1/10th of an inch when the front is flushed out, and the DBM is contoured (designed for the AccuStock) while the McMillan A-6 I was putting it into is not, its flat.


https://imgur.com/8H7xFeL

https://imgur.com/BMOZA29

I did machine the DBM and trigger gaurd, removed about .104" from a couple surfaces and got it to fit rather nicely into the stock.
https://imgur.com/RUBdevx

CDI sits below flush in just about everything, I think they designed it for a 2x4 or something. Here it is in a McMillan A-5
https://imgur.com/A2ar8Eg