You might try Gun Parts Corp. ( Numrich). The sear shouldn't be too much trouble, but if a 3 screw factory isn't available, you might try a Timney. Looks just like the 3 screw. All steel too.
Where to get a replacement sear?
or trigger?
I have a 3 screw trigger with what looks like some wear/home gunsmithing work. The trigger feels good actually, light and crisp, but I noticed that the sear notch is non-existent and the piece of metal that catches and releases on the sear notch is rounded. looks like a recipe for disaster.
You might try Gun Parts Corp. ( Numrich). The sear shouldn't be too much trouble, but if a 3 screw factory isn't available, you might try a Timney. Looks just like the 3 screw. All steel too.
You'll have to call Savage with your serial # and they'll ship you one. They'll usually e-mail you something to sign or they wont ship it.
There is a way to fix the sear if it's rounded, but you have to know what you are doing with mini-files and stones.
I been looking for top bolt release sears lately and have not found any except from Savage directly. They stopped selling certain parts to other dealers. Savage is the only option I can think of.
Savage is the only place for sears, unless you can find a used one. I know cause I looked and looked.
Post a want to buy ad in the forum, someone may have one.
Timney is better than a three screw, has more adjustability.
Sent from my SM-G920V using Tapatalk
Maybe I should make a new thread for this but, what's everyone's preference for aftermarket trigger?
Rifle basix ?
Timney?
SSS Trigger
These were in stock the other day but it looks like it's a no go now. Just my luck I was wanting to order 2-3 and try to get this rifle basix trigger to work right. Someone really needs to come up with something different. I think I'll try a Jard and see if it's any better because it comes with its own sear. https://www.gunpartscorp.com/products/139590F
Tactical works shows them in stock
Sss - sharp shooter supply I believe. Ive seen a couple places where they are highly recommended. Can tune them down to a very low trigger pull.
However, I went to their website and found that the trigger they offer is discontinued?
https://www.sharpshootersupply.com
And this will be going into a hunting rifle. So stock 3 screw will likely work for me unless upgrading the trigger is close to the same price.
Just wasn't what I expected for the money and it's creep or slam fire. No response from RB to my email. My 3 screw was just as good. I ordered a SSS so now we will see how that works. I tried to order one before I ordered the RB but couldn't find them.
Any experience with a Jard? Comes with its own sear so you don't have to use the stamped stock sear like you do with all the others.
I have a two Jard's & they are good triggers. They are bulky in size & may require the stock to be opened up to get one to fit.
Bookmarks