Still waiting for my barrel from Sinman. In the interim, I ordered my dies and brass which arrived yesterday. I'll find out just how good the Nosler brass is. Looking it over, the quality seems to be above par, no dents in the case mouth. The box indicates the cases are ready to load as primer pockets are deburred, cases are sized and case mouth is chamfered. Measuring a few of the cases turned up a measurement of 2.521" which is well below the max of 2.540". I'll start load development using 150gr, 168gr and 175gr SMK's. As Hornady doesn't make an altered case to fit the comparator, I'll have to sacrifice one of the Noslers to make my own. Initially, I'll seat bullets to the max length until I can check my bullets OAL in the new barrel with the comparator.