If you get the provarmint, i suggest you get a colored laminate because it is stronger than the black painted plywood.
I have both, and the laminate is just a little better. It has been impregnated with epoxy resin. But, that black finish is also pretty tough stuff.
Bought the .223 Axis as an inexpensive coyote popper 4 years ago (and haven't really even gone for coyote yet). No intention of changing the stock, so put JB Weld in the fore-end and sanded out the channel. Put some two-part epoxy in the wrist and magazine well walls. Put a Burris ballistic plex scope on it and have 9/16 groups using 55g Hornady SP & Vmax reloads at 100 yards even with my old eyes. Plenty good enough for what I need it for.
I took a heavy barrel stock and did the rockite in forearm and stock, will use this for 270 and 30-06 as its has a little bit more weight. It is not to heavy to carry for my use as a hunting rifle. I also did the rockite on a couple of regular stocks to use with 243,308 and 22-250, did rattle can paint job on all and they turned out decent for hunting rigs.
I upgraded the trigger but I'm not replacing the stock. It shoots just fine with factory one.
I dig my pro varmit
Sent from my SAMSUNG-SM-G891A using Tapatalk
I'm, in no way, a markmanship expert capable of cloverleafing but, I just didn't like the stock. I don't know what effect it would have had on my shooting and it seems I'll never find out. I got my Axis as a Christmas present and the first thing I did was order a Boyds stock for it. I also ordered a M*CARBO trigger spring kit for it and just won a Bushnell Bannner Dusk & Dark, 4-12x40 on EBay with the intent of replacing the Weaver 3-9x40 that came with the rifle. My goal for this rifle is to make it a respectable coyote eliminator. Once all done, I'll post pics.
Been a while since I've had mine apart; how do you get the rocktite into the wrist cavity?
I have a Savage Axis HB in 22-250. With a Timney Trigger, and everything else left alone, including the stock, I consistently shoot 1/2" groups at 100 yards. There is no reason at all to change the stock unless you are looking to upgrade the guns LOOKS. My accuracy surely does not suffer at all.
This is for a Savage Axis factory synthetic stock.
The 308 Axis rifle synthetic stock in factory bare condition (no optic) weighs about 6 lbs.
(1.5 lb stock, 4 lb 7 ounce action, trigger, and barrel)
Weighed it on a scale.
With the rockite in forearm it is 6.5 lbs.
(2 lb stock, 4 lb 7 ounce action, trigger, and barrel)
Weighed on a scale.
An optic with rings (2-7x35 or 3-9x40) will add 1 lb in weight to that.
So 7.5 - 8 lbs is about right for backpack hunting or stalk hunting work.
Felt Recoil is about 17 - 19 lbs for a 270, 308, 30-06 rifle with optic at 8 lbs.
If you rockite the rear hollow synthetic stock area that will add another 1 lbs and fill the grip / rear stock.
That brings the total weight to 9 lbs lbs to tame recoil down to 14 - 16 lbs for felt recoil in above calibers.
If you use attached bipods add another 1 lb for weight.
The heavier a rifle begins to get, the more it gets suited for stationary work.
Above calibers in a 10 lb rifle = 13 lb recoil or comparable to a 30-30 in recoil.
An 8 lb 243 Win with scope = 10 lbs felt recoil with 100gr bullets.
That is a deer slayer with minimum felt recoil.
Rockite can be your friend when both stiffening the stock and reducing recoil for the Savage Axis.
After the rockite has dried for a week+, I use Rust-Oleum Leak Seal Black rubber waterproof sealant spray paint on all exposed Rockite in the forearm.
It is made for concrete waterproof sealing. Some will say it isn't needed, but I don't want any chance of water absorbed if caught in a heavy downpour.
The Rockies can have sun and great weather and then 2 hours later can put heavy rain, hail, or snow on you.
It is best to weatherproof some things once and just call it good.
YMMV
Just updating my post from last year. I just sold my Axis XP hardwood in 30-06 to a friend that's starting to deer hunt and needed a worthy rifle. I really liked the rifle, but have many Rem 700 parts so am building an 06 out of those and going a different direction for my 06 build. Don't get me wrong, I really liked the Axis XP and plan to purchase another in 308 hardwood in the future. I was really impressed by the rifle. My suggestion to anyone looking for a better stock than the flimsy factory synthetic on their Axis XP is to hunt down the factory hardwood stock and buy it. They are Boyds stocks and pretty good despite what some may say bout Boyds. For an 06 the extra weight of the wood stock reduced recoil a bit. I also added a limbsaver recoil pad to mine and could shoot it all day long with out any sore shoulder issues which is a concern for some shooters. I also purchased the trigger mod kit for mine and reduced the trigger pull. It only took about 5 rounds to zero the scope after bore sighting (factory setting was about 12 inches low and 4 inches to the right). I found only a slight difference with this rifle between 125 gr handloads and 165gr handloads in relation to felt recoil. I use Nosler bullets for my rifle handloads and used the ballistic tips for my axis xp. After sighting in I was able to get tight groups with the Weaver Kaspa scope that came on the rifle. I put quite a few boxes of handloads through the rifle and did not have to readjust the scope with the exception of small height adjustments for using heavier weight bullets.
To sum things up. Buy the Boyds hardwood stock. Break in the barrel properly. Reduce the factory trigger pull weight. Change the factory scope if you choose. Don't let anyone badmouth the rifle, and enjoy your purchase. They are a great rifle at a budget price.
I bought my Axis 223 three years ago and I have kept the factory stock. I use it to shoot sage rats in Eastern Oregon and NE California a few times a year. I get half inch accuracy at 100 yards using Hornady 53 grain HP match bullets and RL7. I added a Leupold 4X12 and a slip on recoil pad to increase the length of pull. This set up works for me.
I have a savage axis in 30-06 that I bought a few years ago. I haven't done any mods to it at all, right now it shooting MOA groups. But I love all of this information and I may try stiffening my stock in the future. I have no problem with the factory stock and it shoots well enough to suit me. But I love projects so it might happen in the future.
My Axis II HB in .223 also has the original stock on it. I mostly shoot off a bench with a bipod on the front swivel. But, when shooting I put almost no pressure on the forend. My off hand is holding the bag under the rear stock. Trigger hand is just loose around the grip. And, yes, I also get better than MOA groups with it unless I mess up.
But, I have decided to put a Boyd's stock on it. Mainly just for looks but I will appreciate the extra weight as well. Yes, I could have just added weight to the plastic stock but I wanted something better looking.
So, no you don't have to change out the plastic stock unless you are someone who puts a lot of stress on the forearm.
Sent from my SM-P580 using Tapatalk
Bookmarks