Quote Originally Posted by kimbrell224 View Post
Here’s another problem I ran into....I mounted the scope with Vortex Pro rings by procedure and free the first 5 or 6 shots the scope had slid all the way forward. Not only did I have to start all over with zeroing, it scratched the scope pretty bad. I was not happy about that at all. I might look for a different set of rings today.
With the standard trigger and heavier pull weight (3 lbs and up) there seems to be some "creep" with them. I did a trigger job on mine (coil snipping--voids warranty) to make it about 2 lbs or there about.
I prefer the 6 hole Blackhawk tactical rings myself. They run about $50 for the set. Rings usually need about 20-25 inch lbs. to secure the scope depending on what they're made out of.

The other thing that may be effecting accuracy is the wrist part of the stock will flex when pulling the trigger and during recoil. Makes it pretty difficult to repeat time after time.