Welcome to the forum Jon.
I use two piece bases from Warne, Weaver or Burris and Warne Maxima rings. The two piece bases are a little lower than full length rails. And, the Warne low 30mm rings will put a 50mm objective just a hair over a varmint profile barrel. There's no room for scope caps.
But your scope is a couple inches shorter and has a 34mm tube. Check your mounting length. If you have 5-1/2 to 6 inches, these are made from steel and will offer some mounting versatility, but the bell of your scope is going to be very close to your barrel nut:
https://www.midwayusa.com/product/66...versible-front
https://www.midwayusa.com/product/15...le-rings-matte
Good luck,
Dana
Bookmarks