Quote Originally Posted by geargrinder View Post
I drilled a piece of 2x4 just as big as about the middle of the case. I used that to hold the brass under the drill press. Not the most elegant solution, but it worked good enough.

I used a fired case without sizing it.
Good idea. I'll try the 2x4..
As for using the fired case I don't think it will work for me. When I size my cases for loading I like to set the shoulders back .002" from what the fire formed case measures coming out of the chamber. So unless my modified case has the same dimensions as the case with the .002" set back the measurements won't jive.