Quote Originally Posted by NicfromAlabama View Post
The barrel nut on the 12FV I plan to barrel swap has a smooth barrel nut. My 22-250 12FV purchased earlier this year is the notched type though. I know Wheeler makes a round nut wrench, and I have read of some using a pipe wrench to remove it as well. I also read of someone putting their rifle barrel in a vise and unscrewing the receiver away from the smooth barrel nut. Any suggestions on the best approach to that?

If I order a barrel, I figured I would try Northland Shooters Supply. From those that used them, how long did it take to receive their barrels? I will most likely request to have my muzzle threaded, so I know that most certainly will add some extra wait time.
On the smooth barrel nut, you don't have to remove it unless you're planning on reusing it just put the barrel in a barrel Vise and use the action wrench to turn the action away from the nut and the action will spin off

Sent from my SAMSUNG-SM-G935A using Tapatalk