you need a new stock to go along with your new barrels
I had my old model BA 10 and BA 110 rebarreled. So for this change over I also bought the recoil lug and barrel nut from NSS. Well after a number of months the rebarreled actions are home. Of course all excited to get rifles back together. Humm, action will not fit back in the original stocks. Appears that the recoil lugs are not profiled as the originals. They are binding up on the sides of the all aluminum accustock. Options?
you need a new stock to go along with your new barrels
The Accustock uses a slightly different recoil lug (shaped more like a Rem 700 lug) than a standard stock. One of these days the parts pimps will start asking customers if they have an AccuStock when taking their order as this same issue is popping up over and over and over again.
Easiest solution for you would be to do this: http://68forums.com/forums/showthrea...-Project/page2
"Life' is tough. It's even tougher if you're stupid." ~ John Wayne
“Under certain circumstances, urgent circumstances, desperate circumstances, profanity provides a relief denied even to prayer.” —Mark Twain
Mr Furious, I commend you on the link to another site to to assist a shooter with an issue.
Thank you
jim
6CM
Bookmarks