Quote Originally Posted by LoneWolf View Post
check my barrel before every match I travel too.
That's not a bad idea for anyone who uses the lower torque settings. I'm not a major fan of heavy torque settings due to increased stresses possible but am totally aware that several heat/cool cycles can end up with things loosening up. Recently had a Muzzle brake do that very thing. Luckily it was equipped with a pinch bolt so I didn't have to increase the torque, merely tighten the pinch bolt a small amount.

I've pretty much gotten into the habit of checking torque on all screws on my rifles on a regular basis. From action screws on up to to the scope cap screws with everything in between. Usually everything is snug but every once in a while-------