I went standard mounts and X-high Weaver rings. I have the Redfield Battlezone 6-18x44 mounted on mine using the prairie hunter stock, and a Blackhawk cheek riser. My bolt handle clears, but does rub a little. Has caused cosmetic damage but nothing more.

It's the bolt throw that is the issue.... It just rises too high, to get anything bigger than a 2-7 scope to clear. Therefore, you have to raise the scope, or you have to grind off the handle. I filed off the handle a bit on mine, but with lower rings, you may have a little more work to do.

Glades Armory has come out with an Axis specific bot handle, but I have not tried one out to see if the issue has been resolved. They state that it has been checked on the axis action for scope clearance though.