Bump, interested in this as well.
So I just got my lee load all 2 in the mail. I'm still waiting on my melting pot and other toys needed but I've not been able to find any reliable information on whether to use 2 3/4 or 3 inch hulls? I'm going to use the Lyman 20 gauge 350 grain sabot mould. Also waiting on the Lyman 5th shotshell loading book but figured I would ask you guys if you knew of any differences between the two hulls? I know from the factory the 3 inchers tend to kick more. I would assume from a heavier powder load.
Sent from my SM-G935V using Tapatalk
Bump, interested in this as well.
Go here http://www.ballisticproducts.com/ everything you need for shot gun loading including manuals for slugs.
FROGGY
See profile for fire arms
Do it today there maybe no tomorrow
Use 3" and trim to 2 3/4 to get rid of the skive unless you can find unskived hulls somewhere
That's assuming that you are going to roll crimp
FINALLY got both my shotshell reloading manuals in the mail today. 1 for brass and one for plastic hulls. I'll update in the next day or two with what i find.
Sent from my SM-G935V using Tapatalk
Bookmarks