Quote Originally Posted by sharpshooter View Post
Single shot ramps are for center feeds. Your problem is dependent on cartridge length, in other words if the bullet was seated out farther, it would start into the chamber mouth before the rest of the case tips. This has always been a problem especially with lighter bullets. The best solution is to cut a feed cone on the breech that is identical to one on an AR-15.
Thank you for the comments. My original thought was that a chamfer of some sort was needed but I didn't know how much of one because of loosing case support. I'll talk to a gunsmith I've used and see if he can do that.

Thanks again for all of the information, folks.

Hank