Varget works in my Hog hunter 308.with 150gr Noslers
Haven't loaded any 308 in a while and I don't remember what the weight was.
We moved from IL to Mo and I haven't found everything yet
Does anyone have some load data for a 308 fcp using an 150gr accubond? I've never owned a 308 and there is a lot of different options for powder and charge size.
Can someone point me in the right direction for at least the powder to start with? The charge size i guess i could figure out as i go.
Thanks,
Dave
Sent from my SAMSUNG-SM-G930A using Tapatalk
Varget works in my Hog hunter 308.with 150gr Noslers
Haven't loaded any 308 in a while and I don't remember what the weight was.
We moved from IL to Mo and I haven't found everything yet
Ok, thanks, Ill lookup some info on it. Noslers page shows TAC being a good 308 powder for fps and accuracy. 42gr of TAC has around 110 more fps than 42.5 of Varget. Have you heard anything about it?
Thanks,
Dave
Sent from my SAMSUNG-SM-G930A using Tapatalk
Loaded Accubond 150 gr with .308 Ruger Hawkeye, 22 inch, 1:10
Federal Brass 3TF
Trim 2.008
Shoulder bumped back to 1.620 (.002)
Neck Tension .002
COAL 2.800
H4895 42.5 gr (43.0 showed some flattening primer, no hard bolt lift, used final 42.5 gr)
Chrono Avg 2710 fps, Spread 22, SD 9, 10 shot group, 79 deg F
Grouped 0.6 to 0.7 moa @ 100
You can live by your Core Values—honor, courage and commitment.
Dang, now that's some data! I've seen the h4895 come up in a few articles I've found. My buddy reloads for me and he used that powder in my 243 and it did great.
Sent from my SAMSUNG-SM-G930A using Tapatalk
I'll hit up the local gun shops in town and see what they have. That will narrow my choices down real fast, then I'll repost with the available powder in my area for everyones opinion. Im suspecting not a lot of options, we have quite a few gun shops but typically they dont carry much for reloading accessories. No way am i paying hazmat shipping and i dont want to buy a lot on my first outing in case my rifle doesn't like it.
Thanks
Sent from my SAMSUNG-SM-G930A using Tapatalk
This may help you in your endeavors https://load-data.nosler.com/nosler-...-Win-150gr.pdf
Use Varget If you can find it. You can run up to 45+ grains with your bullet. Work up in small increments and use something like an OCW Load Workup. You will learn a lot. Buy dies that don't overwork your brass like Lee does.
The Dunning-Kruger effect is alive and well.
45 to 47 gr of Varget is a good window. Reduce and work up especially with GI brass.
Bookmarks