Well, baffle or not, (the Axis manual shows something like the baffle) what I'm looking for is this measurement on an Axis that was built in a short action caliber.




SageRat, what was limiting you about the Axis? The chassis I'm looking at is available for both the 10 and the Axis, I can get the same aftermarket triggers and mount the same barrel on them. I also found out today that having SSS true and tune an Axis costs less than for a 10. So I can get a trued, tuned Axis receiver for less than an out of the box 10. Maybe the Axis used to have no support, but I'd be using the same parts here as if I were to build a 10. Did you find that there was anything inherent in the Axis receiver that caused an issue?