Quote Originally Posted by MrFurious View Post
Had to do a little digging, but I found my verification.



Here's a comparison of the bottom metal for a long action, 220F and a short action. The footprint of the 220F bottom metal matches the short action, but the screw spacing of the 220F is the same as a long action. So no, that stock won't work for your 220F as the inlet for the bottom metal would be wrong.

I don't know of anyone making an aftermarket synthetic stock for the 220F, but laminate stocks are available from a couple suppliers.
Thank you for the info! Savage strikes again! I was hoping to find a stock with a bedding block.