Hank,

Just a thought, you could do a spring swap on the non-accutrigger which would drop the pull weight down from that 7 lb. down to about 2.5- 3 lbs... You can find replacement springs on Amazon.... or the spring out of a Bic retractable pen.

The other thing that I did was to "snip" a few coils off of the stock spring which lightened mine up to about 3 lbs.

Disclaimer: It will void your warranty, and may result in an accidental discharge if banged too hard. With that being said, I've tested it over and over again, and I've never had an accidental discharge.