Quote Originally Posted by bearcatrp View Post
I pull mine on my 10T. Been looking for a mini case to put it in so it won't slide around in the case. As much as you don't want to admit it, your wife was right!
Other option (if you have corrugated foam rather than a cut-out layer) is to cut a couple slits in the bottom piece of foam and then run a strip of 1/2 or 3/4" wide velcro through so you can strap the bolt down. Same method as they use to strap bows into hard cases. If you're worried about it tearing the foam you can reinforce it on the back side with come cardboard or 1/8" hardboard panel.