This info should be of use to you.
http://www.savageshooters.com/PDF_Files/WhatFits.pdf
I'm venturing into the swap barrel waters and I have some questions.
Would rebarreling from the .25-06 Rem to 6.5x.284 Lapua or .284 Winchester simply require a new barrel ?
Will the .25-06 FCNS magazine work with the .284 Win case or will I need to purchase the Savage 6.5x.284 magazine?
Would any modification to the action be required?
I'm mostly interested in increased hunting capability ie bullet weight. I know I could go up to a 6.5-06 or .280 Rem easier but the Winchester case intrigues me.
Any suggestions gratefully accepted. TIA
-LT-
This info should be of use to you.
http://www.savageshooters.com/PDF_Files/WhatFits.pdf
I have built a bunch of 284 based rigs on LA 06 magged rigs and never had any real issues. Most fed fine. The 284 NEEDS to be LA anyway and was supposedly originally designed as an LA.
1) Open your reloading manual and look at the case drawings. As long as the cases in question have the same head size, you don't need to change bolt heads. So the lithe guys (223, etc) are all 0.378". Standard bolt faces are about 0.470", and the magnums are something like 0.538"
2) No one but you can answer that. Savage QC is hit and miss, and there is a lot of voodoo involved. I've gone from 7mm Rem Mag--> 22-250 and been fine. I've gone from 30-06-->264WM and had to buy parts.
3)No.
4) A re-barrel is a re-barrel, one isn't easier or harder. But if the case intrigues you, do it.
I'm a firm believer in the theory that if it bleeds, I can kill it.
Thank you olddav that's a good reference chart.
I know that the FCNS bolt head and action length are compatible for both the -06 and .284 Winchester.
I'm most unsure, due to my level of experience with Savage rifles, about the use of a Savage -06 magazine with the larger base diameter .501" Winchester case vs the .470" Rem base diameter.
toddcdozer have you used the factory -06 magazines for any of your 284 based projects? After reading darkker's response I checked again and caught my error about a factory 284 based magazine so I'm wondering if the -06 mags will work?
I'm on a bit of a budget so I'd rather use factory or readily available parts than having to resort to "voodoo"?
Thanks again, LT
Thanks Todd
[B]MAGA 2017[/B]
Same idea using the Hand load books for reference you can look at the overall case shape and size, see if its close.
Always nice to know someone has done it and worked fine.
Bookmarks