Results 1 to 10 of 10

Thread: Quick Technical Bolt Head ?

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 12-06-2016, 10:40 AM #7
    wbm
    Status
    Offline
    Team Savage wbm's Avatar
    Join Date
    Dec 2006
    Location
    New Mexico
    Age
    80
    Posts
    2,647
    a .30-'06 head should, right?
    First off check out what short round said about the alignment cut.

    I also have a Savage flat back long action that came in 7mm magnum. I have always just switched the bolt head with a standard 30-06. Have used this action as a 7mm magnum, 6.5x55, and 308 or 243 single shot. Never have had modify anything just switch bolt heads. Right now it is set up as a 6.5 Creedmoor single shot....head space is correct, feeding and extraction/ejection are flawless. How old is your action....what is the prefix letter on the serial number?
    Last edited by wbm; 12-06-2016 at 10:54 AM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. early recessed bolt head, switch to new bolt head?
    By Jeff518 in forum 110-Series Rifles
    Replies: 7
    Last Post: 02-10-2015, 04:57 PM
  2. Article: Quick Tip: Savage Bottom Bolt Release “Third Hand”
    By thomae in forum Article Discussions
    Replies: 1
    Last Post: 02-11-2014, 10:54 AM
  3. Savage Bolt head plunger spring-----Lost-----quick question
    By youngtrout in forum 110-Series Rifles
    Replies: 6
    Last Post: 08-11-2011, 01:14 PM

Members who have read this thread in the last 1 days: 0

There are no members to list at the moment.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules