Measuring to cut my barrels.

[squirrel_slayer]

I shoot my 18.5 to 950 with good success. it will shoot 208 amax's at 2525 loaded long with 2000mr which is supersonic to ~1400yds. just got alot of practice ahead of me to get out there.

I cut down a 300wm sporter to 20" just for fun and threaded/recrowned it. I just used the cleaning rod method. close bolt drop cleaning rod down bore, put a piece of masking tape on rod, remove rod, measure to the tape, subtract amount to get to desired length, mark, then cut away. remember measure twice, cut once.