Quote Originally Posted by copterdrvr View Post
Thanks for the info guys!

T10, how do the primers look and any bolt lift problems? I'm shooting a Savage FLV and my load leaves a very TINY bit of primer flow around the firing pin strike mark but the shoulders are round and no bolt lift problems. I'm figuring its just a slightly oversize firing pin hole in the bolt face.

I'm going to the range to chrono tomorrow, but it looks like my load of 24.6 of H4895 should be around 2910 as it is right now and I'm curious if your load shows any pressure signs.
No primer issues beyond what you describe. Less apparent when using BR-4 primers, as they have thicker cups. No bolt stickiness either. It is a warm load, but not in excess of published loads, not that that is a definitive line in the sand. Ya gotta be careful, right?