I've had no problems with reliable feeding in a Savage LA centerfeed using .243, .260, .308 or and .338-06 barrels. But this is with a blind magazine stock. With a blind magazine centerfeed stock you could make an extended L-clip and attach to a SA magazine. But I did not like the L-clip and removed it. I then used plumber epoxy on the bottom corners of the magazine and Velcro on the side to properly position the magazine in the stock. Place a spacer (business card) between the bolt and magazine and tape in proper position to action. Put a small ball of plumber epoxy on each corner of the magazine and then attach stock to action. This will form place holders in the stock for the SA and LA magazines. Add Velcro to the sides to help hold firmly in place, but still allow removal. I don't see why you could not position a SA magazine and LA magazine to use interchangeable in the same LA centerfeed stock.
I'm not sure you would have as much flexability with a DBM and HFP stock.
Bookmarks