Yes, thanks for the link!
With my Axis HB and two 12 FVs, I see I have $250 in rebates pending. A portion of my brain reasoned, "That's enough for another 12 FV!"
here's hoping they go on sale again. i almost bought a 3rd with a couple days left in june, but was sorta burned out. but i've recuperated now!
I sure hope they get them on sale again, i need a 308
Chet
I'm safe, all my intents are in long action venue right now, phew
I picked up a 12FV in 308 (thanks to this thread) on 6/27 and shot it today. I'm sure I could spend a lot of money on mods, but my last 4 shots were all touching at 121 yards. It'll work great on Indiana deer. I love this rifle. Thanks for spreading the word about the sale and rebate.
Last edited by Benmuncie; 07-11-2016 at 07:46 PM.
Does anyone have pictures they would like to share of their 12fv with a Boyd's or other aftermarket stock installed?
Actually amazing at what price 🖒
Sent from my SM-N920T using Tapatalk
How often does Savage offer rebates and Cabellas have a sale? If it happens again I'm going to get one or two of them.
IIRC, Savage usually has a fall and spring rebate program. There should be another coming up in a few months. As for Cabelas, typically around Fathers day they put the model 12 on sale. Picked one up last year in May, and another this year.
This years purchase was a 22-250 model 12FV. Shot some factory rounds to break it in while my reloading dies were on their way, and then once they arrived, loaded some 55 grain V-Max over IMR 4320 in a 3 shot load work up starting with 3200 fps and progressing in 100 fps intervals per Hornaday manual. None of the groups were over a half minute at 100 yds, and the best, right at max of 3600 fps grouped an amazing .053".
Can't beat a Savage for out-of-the-box accuracy!
The stock required some minor fitting. The cutout for the bolt handle was rubbing and wouldn't allow full articulation to close the bolt. I had to use some small files to open it up about .020". Other than that, barrel channel was opened and sanding in the receiver area to clean the transition from fiber glass to the bedding block. This was more for glass bedding than anything else.
Indiana just passed the law this Spring allowing rifles that shoot 6mm bullets and 7.62 bullets, but nothing in between. This opened up a lot of cartridges. The law is set to be reviewed in 2020. There is a bigger story here, but I'll spare you the details. The good news is that the 12FV is going to clock in for work.
This is actually my first and only (for now) centerfire rifle. I got it in .308 from Cabelas in May and have had way too much fun shooting it, but I am still waiting on the rebate to come through. It is odd to me that it seems to like the lighter bullets more. I can get .75-1 inch groups consistently with 155 grain bullets and my cheap Vortex, but things start spreading out as the bullets get heavier. My next steps are to get a bipod, or some kind of better rest than the 4x4 block at the range, and start loading for the gun rather than trying to find the right store bought stuff.
But if they go on sale again I will grab up a .223 ... for my son I mean![]()
Mine does better than that with 168 gr area bullets if I can do my end.
I have a front bag and back support
Any guesses when the rebate will roll out? Or if it will at all? Hoping soon if it does, I have $200 in gift cards burning a hole in my pocket lol.
The last couple of years, the model 12's have been in the first half of the year rebate, and the second half of the year had different models.
Bookmarks