Quote Originally Posted by scooterf79 View Post
The mods will probably move it for ya. Hotolds stays on top of things pretty well. I will forewarn you...this path you're going down is addicting......but its A LOT of fun! Good luck with it...I'll keep up with this thread for the progress.
Scooter
Yes it is addicting. I thought I would be ok with one barrel on the way, then wanted to get going and have use for a 308 barrel on the other gun and so.....

Being a mechanic I go about things more the way an engine re-builder would.

I thought the thing should break loose with heat on the nut and thread area and did so.

there is a lot of satisfaction in pulling current tools (breaker bar and torque wrench, vice) into use with a plan that works per past experience

The idea is to have something that I could do free of a gunsmith and not a major pain (I get plenty of that at work).

Its proven to be exactly that so the research into the Savage and what can be done with it was spot on as well (enjoying the benefit of others have paved the road for me!)

Maybe the Moderators can change the title to Action Tool Use?